%patch
Index: linux/arch/ia64/kernel/cyclone.c
===================================================================
--- linux.orig/arch/ia64/kernel/cyclone.c 2004-04-03 19:36:58.000000000 -0800
+++ linux/arch/ia64/kernel/cyclone.c 2004-09-27 09:42:51.000000000 -0700
@@ -16,62 +16,10 @@
return 1;
}
-static u32* volatile cyclone_timer; /* Cyclone MPMC0 register */
-static u32 last_update_cyclone;
-
-static unsigned long offset_base;
-
-static unsigned long get_offset_cyclone(void)
-{
- u32 now;
- unsigned long offset;
-
- /* Read the cyclone timer */
- now = readl(cyclone_timer);
- /* .. relative to previous update*/
- offset = now - last_update_cyclone;
-
- /* convert cyclone ticks to nanoseconds */
- offset = (offset*NSEC_PER_SEC)/CYCLONE_TIMER_FREQ;
-
- /* our adjusted time in nanoseconds */
- return offset_base + offset;
-}
-
-static void update_cyclone(long delta_nsec)
-{
- u32 now;
- unsigned long offset;
-
- /* Read the cyclone timer */
- now = readl(cyclone_timer);
- /* .. relative to previous update*/
- offset = now - last_update_cyclone;
-
- /* convert cyclone ticks to nanoseconds */
- offset = (offset*NSEC_PER_SEC)/CYCLONE_TIMER_FREQ;
-
- offset += offset_base;
-
- /* Be careful about signed/unsigned comparisons here: */
- if (delta_nsec < 0 || (unsigned long) delta_nsec < offset)
- offset_base = offset - delta_nsec;
- else
- offset_base = 0;
-
- last_update_cyclone = now;
-}
-
-static void reset_cyclone(void)
-{
- offset_base = 0;
- last_update_cyclone = readl(cyclone_timer);
-}
struct time_interpolator cyclone_interpolator = {
- .get_offset = get_offset_cyclone,
- .update = update_cyclone,
- .reset = reset_cyclone,
+ .source = TIME_SOURCE_MMIO32,
+ .shift = 32,
.frequency = CYCLONE_TIMER_FREQ,
.drift = -100,
};
@@ -82,6 +30,7 @@
u64 base; /* saved cyclone base address */
u64 offset; /* offset from pageaddr to cyclone_timer register */
int i;
+ u32* volatile cyclone_timer; /* Cyclone MPMC0 register */
if (!use_cyclone)
return -ENODEV;
@@ -149,7 +98,7 @@
}
}
/* initialize last tick */
- last_update_cyclone = readl(cyclone_timer);
+ cyclone_interpolator.addr = cyclone_timer;
register_time_interpolator(&cyclone_interpolator);
return 0;
Index: linux/arch/ia64/kernel/fsys.S
===================================================================
--- linux.orig/arch/ia64/kernel/fsys.S 2004-09-27 09:41:37.000000000 -0700
+++ linux/arch/ia64/kernel/fsys.S 2004-09-27 09:42:51.000000000 -0700
@@ -8,6 +8,8 @@
* 18-Feb-03 louisk Implement fsys_gettimeofday().
* 28-Feb-03 davidm Fixed several bugs in fsys_gettimeofday(). Tuned it some more,
* probably broke it along the way... ;-)
+ * 13-Jul-04 clameter Implement fsys_clock_gettime and revise fsys_gettimeofday to make
+ * it capable of using memory based clocks without falling back to C code.
*/
#include <asm/asmmacro.h>
@@ -144,195 +146,206 @@
END(fsys_set_tid_address)
/*
- * Note 1: This routine uses floating-point registers, but only with registers that
- * operate on integers. Because of that, we don't need to set ar.fpsr to the
- * kernel default value.
- *
- * Note 2: For now, we will assume that all CPUs run at the same clock-frequency.
- * If that wasn't the case, we would have to disable preemption (e.g.,
- * by disabling interrupts) between reading the ITC and reading
- * local_cpu_data->nsec_per_cyc.
- *
- * Note 3: On platforms where the ITC-drift bit is set in the SAL feature vector,
- * we ought to either skip the ITC-based interpolation or run an ntp-like
- * daemon to keep the ITCs from drifting too far apart.
+ * Ensure that the time interpolator structure is compatible with the asm code
*/
+#if IA64_TIME_INTERPOLATOR_SOURCE_OFFSET !=0 || IA64_TIME_INTERPOLATOR_SHIFT_OFFSET != 2 \
+ || IA64_TIME_INTERPOLATOR_JITTER_OFFSET != 3 || IA64_TIME_INTERPOLATOR_NSEC_OFFSET != 4
+#error fsys_gettimeofday incompatible with changes to struct time_interpolator
+#endif
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_DIVIDE_BY_1000 0x4000
+#define CLOCK_ADD_MONOTONIC 0x8000
ENTRY(fsys_gettimeofday)
.prologue
.altrp b6
.body
- add r9=TI_FLAGS+IA64_TASK_SIZE,r16
- addl r3=THIS_CPU(cpu_info),r0
-
-#ifdef CONFIG_SMP
- movl r10=__per_cpu_offset
- movl r2=sal_platform_features
- ;;
-
- ld8 r2=[r2]
- movl r19=xtime // xtime is a timespec struct
-
- ld8 r10=[r10] // r10 <- __per_cpu_offset[0]
- addl r21=THIS_CPU(cpu_info),r0
- ;;
- add r10=r21, r10 // r10 <- &cpu_data(time_keeper_id)
- tbit.nz p8,p0 = r2, IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT
-(p8) br.spnt.many fsys_fallback_syscall
-#else
- ;;
- mov r10=r3
- movl r19=xtime // xtime is a timespec struct
-#endif
- ld4 r9=[r9]
- movl r17=xtime_lock
- ;;
-
- // r32, r33 should contain the 2 args of gettimeofday
- adds r21=IA64_CPUINFO_ITM_NEXT_OFFSET, r10
- mov r2=-1
- tnat.nz p6,p7=r32 // guard against NaT args
- ;;
-
- adds r10=IA64_CPUINFO_ITM_DELTA_OFFSET, r10
-(p7) tnat.nz p6,p0=r33
-(p6) br.cond.spnt.few .fail_einval
-
- adds r8=IA64_CPUINFO_NSEC_PER_CYC_OFFSET, r3
- movl r24=2361183241434822607 // for division hack (only for / 1000)
- ;;
-
- ldf8 f7=[r10] // f7 now contains itm_delta
- setf.sig f11=r2
- adds r10=8, r32
-
- adds r20=IA64_TIMESPEC_TV_NSEC_OFFSET, r19 // r20 = &xtime->tv_nsec
- movl r26=jiffies
-
- setf.sig f9=r24 // f9 is used for division hack
- movl r27=wall_jiffies
-
- and r9=TIF_ALLWORK_MASK,r9
- movl r25=last_nsec_offset
- ;;
-
- /*
- * Verify that we have permission to write to struct timeval. Note:
- * Another thread might unmap the mapping before we actually get
- * to store the result. That's OK as long as the stores are also
- * protect by EX().
- */
-EX(.fail_efault, probe.w.fault r32, 3) // this must come _after_ NaT-check
-EX(.fail_efault, probe.w.fault r10, 3) // this must come _after_ NaT-check
- nop 0
-
- ldf8 f10=[r8] // f10 <- local_cpu_data->nsec_per_cyc value
- cmp.ne p8, p0=0, r9
-(p8) br.spnt.many fsys_fallback_syscall
- ;;
-.retry: // *** seq = read_seqbegin(&xtime_lock); ***
- ld4.acq r23=[r17] // since &xtime_lock == &xtime_lock->sequence
- ld8 r14=[r25] // r14 (old) = last_nsec_offset
-
- ld8 r28=[r26] // r28 = jiffies
- ld8 r29=[r27] // r29 = wall_jiffies
- ;;
-
- ldf8 f8=[r21] // f8 now contains itm_next
- mov.m r31=ar.itc // put time stamp into r31 (ITC) == now
- sub r28=r29, r28, 1 // r28 now contains "-(lost + 1)"
- ;;
-
- ld8 r2=[r19] // r2 = sec = xtime.tv_sec
- ld8 r29=[r20] // r29 = nsec = xtime.tv_nsec
- tbit.nz p9, p10=r23, 0 // p9 <- is_odd(r23), p10 <- is_even(r23)
-
- setf.sig f6=r28 // f6 <- -(lost + 1) (6 cyc)
- ;;
-
+ mov r31 = r32
+ tnat.nz p6,p0 = r33 // guard against NaT argument
+(p6) br.cond.spnt.few .fail_einval
+ mov r30 = CLOCK_DIVIDE_BY_1000
+ ;;
+.gettime:
+ // Register map
+ // Incoming r31 = pointer to address where to place result
+ // r30 = flags determining how time is processed
+ // r2,r3 = temp r4-r7 preserved
+ // r8 = result nanoseconds
+ // r9 = result seconds
+ // r10 = temporary storage for clock difference
+ // r11 = preserved: saved ar.pfs
+ // r12 = preserved: memory stack
+ // r13 = preserved: thread pointer
+ // r14 = debug pointer / usable
+ // r15 = preserved: system call number
+ // r16 = preserved: current task pointer
+ // r17 = wall to monotonic use
+ // r18 = time_interpolator->offset
+ // r19 = address of wall_to_monotonic
+ // r20 = pointer to struct time_interpolator / pointer to time_interpolator->address
+ // r21 = shift factor
+ // r22 = address of time interpolator->last_counter
+ // r23 = address of time_interpolator->last_cycle
+ // r24 = adress of time_interpolator->offset
+ // r25 = last_cycle value
+ // r26 = last_counter value
+ // r27 = pointer to xtime
+ // r28 = sequence number at the beginning of critcal section
+ // r29 = address of seqlock
+ // r30 = time processing flags / memory address
+ // r31 = pointer to result
+ // Predicates
+ // p6,p7 short term use
+ // p8 = timesource ar.itc
+ // p9 = timesource mmio64
+ // p10 = timesource mmio32
+ // p11 = timesource not to be handled by asm code
+ // p12 = memory time source ( = p9 | p10)
+ // p13 = do cmpxchg with time_interpolator_last_cycle
+ // p14 = Divide by 1000
+ // p15 = Add monotonic
+ //
+ // Note that instructions are optimized for McKinley. McKinley can process two
+ // bundles simultaneously and therefore we continuously try to feed the CPU
+ // two bundles and then a stop.
+ tnat.nz p6,p0 = r31 // branch deferred since it does not fit into bundle structure
+ mov pr = r30,0xc000 // Set predicates according to function
+ add r2 = TI_FLAGS+IA64_TASK_SIZE,r16
+ movl r20 = time_interpolator
+ ;;
+ ld8 r20 = [r20] // get pointer to time_interpolator structure
+ movl r29 = xtime_lock
+ ld4 r2 = [r2] // process work pending flags
+ movl r27 = xtime
+ ;; // only one bundle here
+ ld8 r21 = [r20] // first quad with control information
+ and r2 = TIF_ALLWORK_MASK,r2
+(p6) br.cond.spnt.few .fail_einval // deferred branch
+ ;;
+ add r10 = IA64_TIME_INTERPOLATOR_ADDRESS_OFFSET,r20
+ extr r3 = r21,32,32 // time_interpolator->nsec_per_cyc
+ extr r8 = r21,0,16 // time_interpolator->source
+ nop.i 123
+ cmp.ne p6, p0 = 0, r2 // Fallback if work is scheduled
+(p6) br.cond.spnt.many fsys_fallback_syscall
+ ;;
+ cmp.eq p8,p12 = 0,r8 // Check for cpu timer
+ cmp.eq p9,p0 = 1,r8 // MMIO64 ?
+ extr r2 = r21,24,8 // time_interpolator->jitter
+ cmp.eq p10,p0 = 2,r8 // MMIO32 ?
+ cmp.lt p11,p0 = 2,r8 // function?
+(p11) br.cond.spnt.many fsys_fallback_syscall
+ ;;
+ setf.sig f7 = r3 // Setup for scaling of counter
+(p15) movl r19 = wall_to_monotonic
+(p12) ld8 r30 = [r10]
+ cmp.ne p13,p0 = r2,r0 // need jitter compensation?
+ extr r21 = r21,16,8 // shift factor
+ ;;
+.time_redo:
+ .pred.rel.mutex p8,p9,p10
+ ld4.acq r28 = [r29] // xtime_lock.sequence. Must come first for locking purposes
+(p8) mov r2 = ar.itc // CPU_TIMER. 36 clocks latency!!!
+ add r22 = IA64_TIME_INTERPOLATOR_LAST_COUNTER_OFFSET,r20
+(p9) ld8 r2 = [r30] // readq(ti->address). Could also have latency issues..
+(p10) ld4 r2 = [r30] // readw(ti->address)
+(p13) add r23 = IA64_TIME_INTERPOLATOR_LAST_CYCLE_OFFSET,r20
+ ;; // could be removed by moving the last add upward
+ ld8 r26 = [r22] // time_interpolator->last_counter
+(p13) ld8 r25 = [r23] // time interpolator->last_cycle
+ add r24 = IA64_TIME_INTERPOLATOR_OFFSET_OFFSET,r20
+(p15) ld8 r17 = [r19],IA64_TIMESPEC_TV_NSEC_OFFSET
+ ld8 r9 = [r27],IA64_TIMESPEC_TV_NSEC_OFFSET
+ nop.i 123
+ ;;
+ ld8 r18 = [r24] // time_interpolator->offset
+ ld8 r8 = [r27],-IA64_TIMESPEC_TV_NSEC_OFFSET // xtime.tv_nsec
+(p13) sub r3 = r25,r2 // Diff needed before comparison (thanks davidm)
+ ;;
+(p13) cmp.gt.unc p6,p7 = r3,r0 // check if it is less than last. p6,p7 cleared
+ sub r10 = r2,r26 // current_counter - last_counter
+ ;;
+(p6) sub r10 = r25,r26 // time we got was less than last_cycle
+(p7) mov ar.ccv = r25 // more than last_cycle. Prep for cmpxchg
+ ;;
+ setf.sig f8 = r10
+ nop.i 123
+ ;;
+(p7) cmpxchg8.rel r3 = [r23],r2,ar.ccv
+EX(.fail_efault, probe.w.fault r31, 3) // This takes 5 cycles and we have spare time
+ xmpy.l f8 = f8,f7 // nsec_per_cyc*(counter-last_counter)
+(p15) add r9 = r9,r17 // Add wall to monotonic.secs to result secs
+ ;;
+(p15) ld8 r17 = [r19],-IA64_TIMESPEC_TV_NSEC_OFFSET
+(p7) cmp.ne p7,p0 = r25,r3 // if cmpxchg not successful redo
+ // simulate tbit.nz.or p7,p0 = r28,0
+ and r28 = ~1,r28 // Make sequence even to force retry if odd
+ getf.sig r2 = f8
mf
- xma.l f8=f6, f7, f8 // f8 (last_tick) <- -(lost + 1)*itm_delta + itm_next (5 cyc)
- nop 0
-
- setf.sig f12=r31 // f12 <- ITC (6 cyc)
- // *** if (unlikely(read_seqretry(&xtime_lock, seq))) continue; ***
- ld4 r24=[r17] // r24 = xtime_lock->sequence (re-read)
- nop 0
- ;;
-
- xma.l f8=f11, f8, f12 // f8 (elapsed_cycles) <- (-1*last_tick + now) = (now - last_tick)
- nop 0
- ;;
-
- getf.sig r18=f8 // r18 <- (now - last_tick)
- xmpy.l f8=f8, f10 // f8 <- elapsed_cycles*nsec_per_cyc (5 cyc)
- add r3=r29, r14 // r3 = (nsec + old)
- ;;
-
- cmp.lt p7, p8=r18, r0 // if now < last_tick, set p7 = 1, p8 = 0
- getf.sig r18=f8 // r18 = elapsed_cycles*nsec_per_cyc (6 cyc)
- nop 0
- ;;
-
-(p10) cmp.ne p9, p0=r23, r24 // if xtime_lock->sequence != seq, set p9
- shr.u r18=r18, IA64_NSEC_PER_CYC_SHIFT // r18 <- offset
-(p9) br.spnt.many .retry
- ;;
-
- mov ar.ccv=r14 // ar.ccv = old (1 cyc)
- cmp.leu p7, p8=r18, r14 // if (offset <= old), set p7 = 1, p8 = 0
+ add r8 = r8,r18 // Add time interpolator offset
;;
-
-(p8) cmpxchg8.rel r24=[r25], r18, ar.ccv // compare-and-exchange (atomic!)
-(p8) add r3=r29, r18 // r3 = (nsec + offset)
- ;;
- shr.u r3=r3, 3 // initiate dividing r3 by 1000
- ;;
- setf.sig f8=r3 // (6 cyc)
- mov r10=1000000 // r10 = 1000000
+ ld4 r10 = [r29] // xtime_lock.sequence
+(p15) add r8 = r8, r17 // Add monotonic.nsecs to nsecs
+ shr.u r2 = r2,r21
+ ;; // overloaded 3 bundles!
+ // End critical section.
+ add r8 = r8,r2 // Add xtime.nsecs
+ cmp4.ne.or p7,p0 = r28,r10
+(p7) br.cond.dpnt.few .time_redo // sequence number changed ?
+ // Now r8=tv->tv_nsec and r9=tv->tv_sec
+ mov r10 = r0
+ movl r2 = 1000000000
+ add r23 = IA64_TIMESPEC_TV_NSEC_OFFSET, r31
+(p14) movl r3 = 2361183241434822607 // Prep for / 1000 hack
+ ;;
+.time_normalize:
+ mov r21 = r8
+ cmp.ge p6,p0 = r8,r2
+(p14) shr.u r20 = r8, 3 // We can repeat this if necessary just wasting some time
+ ;;
+(p14) setf.sig f8 = r20
+(p6) sub r8 = r8,r2
+(p6) add r9 = 1,r9 // two nops before the branch.
+(p14) setf.sig f7 = r3 // Chances for repeats are 1 in 10000 for gettod
+(p6) br.cond.dpnt.few .time_normalize
+ ;;
+ // Divided by 8 though shift. Now divide by 125
+ // The compiler was able to do that with a multiply
+ // and a shift and we do the same
+EX(.fail_efault, probe.w.fault r23, 3) // This also costs 5 cycles
+(p14) xmpy.hu f8 = f8, f7 // xmpy has 5 cycles latency so use it...
;;
-(p8) cmp.ne.unc p9, p0=r24, r14
- xmpy.hu f6=f8, f9 // (5 cyc)
-(p9) br.spnt.many .retry
- ;;
-
- getf.sig r3=f6 // (6 cyc)
+ mov r8 = r0
+(p14) getf.sig r2 = f8
;;
- shr.u r3=r3, 4 // end of division, r3 is divided by 1000 (=usec)
- ;;
-
-1: cmp.geu p7, p0=r3, r10 // while (usec >= 1000000)
- ;;
-(p7) sub r3=r3, r10 // usec -= 1000000
-(p7) adds r2=1, r2 // ++sec
-(p7) br.spnt.many 1b
-
- // finally: r2 = sec, r3 = usec
-EX(.fail_efault, st8 [r32]=r2)
- adds r9=8, r32
- mov r8=r0 // success
+(p14) shr.u r21 = r2, 4
;;
-EX(.fail_efault, st8 [r9]=r3) // store them in the timeval struct
- mov r10=0
+EX(.fail_efault, st8 [r31] = r9)
+EX(.fail_efault, st8 [r23] = r21)
FSYS_RETURN
- /*
- * Note: We are NOT clearing the scratch registers here. Since the only things
- * in those registers are time-related variables and some addresses (which
- * can be obtained from System.map), none of this should be security-sensitive
- * and we should be fine.
- */
-
.fail_einval:
- mov r8=EINVAL // r8 = EINVAL
- mov r10=-1 // r10 = -1
+ mov r8 = EINVAL
+ mov r10 = -1
FSYS_RETURN
-
.fail_efault:
- mov r8=EFAULT // r8 = EFAULT
- mov r10=-1 // r10 = -1
+ mov r8 = EFAULT
+ mov r10 = -1
FSYS_RETURN
END(fsys_gettimeofday)
+ENTRY(fsys_clock_gettime)
+ .prologue
+ .altrp b6
+ .body
+ cmp4.lt p6, p0 = CLOCK_MONOTONIC, r32
+ // Fallback if this is not CLOCK_REALTIME or CLOCK_MONOTONIC
+(p6) br.spnt.few fsys_fallback_syscall
+ mov r31 = r33
+ shl r30 = r32,15
+ br.many .gettime
+END(fsys_clock_gettime)
+
/*
* long fsys_rt_sigprocmask (int how, sigset_t *set, sigset_t *oset, size_t sigsetsize).
*/
@@ -842,7 +855,7 @@
data8 0 // timer_getoverrun
data8 0 // timer_delete
data8 0 // clock_settime
- data8 0 // clock_gettime
+ data8 fsys_clock_gettime // clock_gettime
data8 0 // clock_getres // 1255
data8 0 // clock_nanosleep
data8 0 // fstatfs64
Index: linux/arch/ia64/kernel/time.c
===================================================================
--- linux.orig/arch/ia64/kernel/time.c 2004-09-27 09:42:34.000000000 -0700
+++ linux/arch/ia64/kernel/time.c 2004-09-27 09:42:51.000000000 -0700
@@ -52,146 +52,7 @@
return (offset * local_cpu_data->nsec_per_cyc) >> IA64_NSEC_PER_CYC_SHIFT;
}
-static void
-itc_reset (void)
-{
-}
-
-/*
- * Adjust for the fact that xtime has been advanced by delta_nsec (may be negative and/or
- * larger than NSEC_PER_SEC.
- */
-static void
-itc_update (long delta_nsec)
-{
-}
-
-/*
- * Return the number of nano-seconds that elapsed since the last
- * update to jiffy. It is quite possible that the timer interrupt
- * will interrupt this and result in a race for any of jiffies,
- * wall_jiffies or itm_next. Thus, the xtime_lock must be at least
- * read synchronised when calling this routine (see do_gettimeofday()
- * below for an example).
- */
-unsigned long
-itc_get_offset (void)
-{
- unsigned long elapsed_cycles, lost = jiffies - wall_jiffies;
- unsigned long now = ia64_get_itc(), last_tick;
-
- last_tick = (cpu_data(TIME_KEEPER_ID)->itm_next
- - (lost + 1)*cpu_data(TIME_KEEPER_ID)->itm_delta);
-
- elapsed_cycles = now - last_tick;
- return (elapsed_cycles*local_cpu_data->nsec_per_cyc) >> IA64_NSEC_PER_CYC_SHIFT;
-}
-
-static struct time_interpolator itc_interpolator = {
- .get_offset = itc_get_offset,
- .update = itc_update,
- .reset = itc_reset
-};
-
-int
-do_settimeofday (struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irq(&xtime_lock);
- {
- /*
- * This is revolting. We need to set "xtime" correctly. However, the value
- * in this location is the value at the most recent update of wall time.
- * Discover what correction gettimeofday would have done, and then undo
- * it!
- */
- nsec -= time_interpolator_get_offset();
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- time_adjust = 0; /* stop active adjtime() */
- time_status |= STA_UNSYNC;
- time_maxerror = NTP_PHASE_LIMIT;
- time_esterror = NTP_PHASE_LIMIT;
- time_interpolator_reset();
- }
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
- return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-void
-do_gettimeofday (struct timeval *tv)
-{
- unsigned long seq, nsec, usec, sec, old, offset;
-
- while (1) {
- seq = read_seqbegin(&xtime_lock);
- {
- old = last_nsec_offset;
- offset = time_interpolator_get_offset();
- sec = xtime.tv_sec;
- nsec = xtime.tv_nsec;
- }
- if (unlikely(read_seqretry(&xtime_lock, seq)))
- continue;
- /*
- * Ensure that for any pair of causally ordered gettimeofday() calls, time
- * never goes backwards (even when ITC on different CPUs are not perfectly
- * synchronized). (A pair of concurrent calls to gettimeofday() is by
- * definition non-causal and hence it makes no sense to talk about
- * time-continuity for such calls.)
- *
- * Doing this in a lock-free and race-free manner is tricky. Here is why
- * it works (most of the time): read_seqretry() just succeeded, which
- * implies we calculated a consistent (valid) value for "offset". If the
- * cmpxchg() below succeeds, we further know that last_nsec_offset still
- * has the same value as at the beginning of the loop, so there was
- * presumably no timer-tick or other updates to last_nsec_offset in the
- * meantime. This isn't 100% true though: there _is_ a possibility of a
- * timer-tick occurring right right after read_seqretry() and then getting
- * zero or more other readers which will set last_nsec_offset to the same
- * value as the one we read at the beginning of the loop. If this
- * happens, we'll end up returning a slightly newer time than we ought to
- * (the jump forward is at most "offset" nano-seconds). There is no
- * danger of causing time to go backwards, though, so we are safe in that
- * sense. We could make the probability of this unlucky case occurring
- * arbitrarily small by encoding a version number in last_nsec_offset, but
- * even without versioning, the probability of this unlucky case should be
- * so small that we won't worry about it.
- */
- if (offset <= old) {
- offset = old;
- break;
- } else if (likely(cmpxchg(&last_nsec_offset, old, offset) == old))
- break;
-
- /* someone else beat us to updating last_nsec_offset; try again */
- }
-
- usec = (nsec + offset) / 1000;
-
- while (unlikely(usec >= USEC_PER_SEC)) {
- usec -= USEC_PER_SEC;
- ++sec;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
+static struct time_interpolator itc_interpolator;
/*
* The profiling function is SMP safe. (nothing can mess
@@ -326,6 +187,17 @@
ia64_set_itm(local_cpu_data->itm_next);
}
+static int nojitter;
+
+static int __init nojitter_setup(char *str)
+{
+ nojitter = 1;
+ printk("Jitter checking for ITC timers disabled\n");
+ return 1;
+}
+
+__setup("nojitter", nojitter_setup);
+
void __init
ia64_init_itm (void)
{
@@ -388,7 +260,23 @@
if (!(sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)) {
itc_interpolator.frequency = local_cpu_data->itc_freq;
+ itc_interpolator.shift = 16;
itc_interpolator.drift = itc_drift;
+ itc_interpolator.source = TIME_SOURCE_CPU;
+#ifdef CONFIG_SMP
+ /* On IA64 in an SMP configuration ITCs are never accurately synchronized.
+ * Jitter compensation requires a cmpxchg which may limit
+ * the scalability of the syscalls for retrieving time.
+ * The ITC synchronization is usually successful to within a few
+ * ITC ticks but this is not a sure thing. If you need to improve
+ * timer performance in SMP situations then boot the kernel with the
+ * "nojitter" option. However, doing so may result in time fluctuating (maybe
+ * even going backward) if the ITC offsets between the individual CPUs
+ * are too large.
+ */
+ if (!nojitter) itc_interpolator.jitter = 1;
+#endif
+ itc_interpolator.addr = NULL;
register_time_interpolator(&itc_interpolator);
}
Index: linux/arch/ia64/sn/kernel/sn2/timer.c
===================================================================
--- linux.orig/arch/ia64/sn/kernel/sn2/timer.c 2004-04-03 19:37:23.000000000 -0800
+++ linux/arch/ia64/sn/kernel/sn2/timer.c 2004-09-27 09:42:51.000000000 -0700
@@ -20,57 +20,16 @@
extern unsigned long sn_rtc_cycles_per_second;
-static volatile unsigned long last_wall_rtc;
-static unsigned long rtc_offset; /* updated only when xtime write-lock is held! */
-static long rtc_nsecs_per_cycle;
-static long rtc_per_timer_tick;
-
-static unsigned long
-getoffset(void)
-{
- return rtc_offset + (GET_RTC_COUNTER() - last_wall_rtc)*rtc_nsecs_per_cycle;
-}
-
-
-static void
-update(long delta_nsec)
-{
- unsigned long rtc_counter = GET_RTC_COUNTER();
- unsigned long offset = rtc_offset + (rtc_counter - last_wall_rtc)*rtc_nsecs_per_cycle;
-
- /* Be careful about signed/unsigned comparisons here: */
- if (delta_nsec < 0 || (unsigned long) delta_nsec < offset)
- rtc_offset = offset - delta_nsec;
- else
- rtc_offset = 0;
- last_wall_rtc = rtc_counter;
-}
-
-
-static void
-reset(void)
-{
- rtc_offset = 0;
- last_wall_rtc = GET_RTC_COUNTER();
-}
-
-
-static struct time_interpolator sn2_interpolator = {
- .get_offset = getoffset,
- .update = update,
- .reset = reset
-};
+static struct time_interpolator sn2_interpolator;
void __init
sn_timer_init(void)
{
sn2_interpolator.frequency = sn_rtc_cycles_per_second;
sn2_interpolator.drift = -1; /* unknown */
+ sn2_interpolator.shift = 10; /* RTC is 54 bits maximum shift is 10 */
+ sn2_interpolator.addr = RTC_COUNTER_ADDR;
+ sn2_interpolator.source = TIME_SOURCE_MMIO64;
register_time_interpolator(&sn2_interpolator);
-
- rtc_per_timer_tick = sn_rtc_cycles_per_second / HZ;
- rtc_nsecs_per_cycle = 1000000000 / sn_rtc_cycles_per_second;
-
- last_wall_rtc = GET_RTC_COUNTER();
}
Index: linux/include/linux/timex.h
===================================================================
--- linux.orig/include/linux/timex.h 2004-04-03 19:36:15.000000000 -0800
+++ linux/include/linux/timex.h 2004-09-27 09:44:32.000000000 -0700
@@ -47,6 +47,8 @@
* kernel PLL updated to 1994-12-13 specs (rfc-1589)
* 1997-08-30 Ulrich Windl
* Added new constant NTP_PHASE_LIMIT
+ * 2004-08-12 Christoph Lameter
+ * Reworked time interpolation logic
*/
#ifndef _LINUX_TIMEX_H
#define _LINUX_TIMEX_H
@@ -320,101 +322,60 @@
#ifdef CONFIG_TIME_INTERPOLATION
-struct time_interpolator {
- /* cache-hot stuff first: */
- unsigned long (*get_offset) (void);
- void (*update) (long);
- void (*reset) (void);
+#define TIME_SOURCE_CPU 0
+#define TIME_SOURCE_MMIO64 1
+#define TIME_SOURCE_MMIO32 2
+#define TIME_SOURCE_FUNCTION 3
+
+/* For proper operations time_interpolator clocks must run slightly slower
+ * than the standard clock since the interpolator may only correct by having
+ * time jump forward during a tick. A slower clock is usually a side effect
+ * of the integer divide of the nanoseconds in a second by the frequency.
+ * The accuracy of the division can be increased by specifying a shift.
+ * However, this may cause the clock not to be slow enough.
+ * The interpolator will self-tune the clock by slowing down if no
+ * resets occur or speeding up if the time jumps per analysis cycle
+ * become too high.
+ *
+ * Setting jitter compensates for a fluctuating timesource by comparing
+ * to the last value read from the timesource to insure that an earlier value
+ * is not returned by a later call. The price to pay
+ * for the compensation is that the timer routines are not as scalable anymore.
+ */
- /* cache-cold stuff follows here: */
- struct time_interpolator *next;
+#define INTERPOLATOR_ADJUST 65536
+#define INTERPOLATOR_MAX_SKIP 10*INTERPOLATOR_ADJUST
+
+struct time_interpolator {
+ unsigned short source; /* time source flags */
+ unsigned char shift; /* increases accuracy of multiply by shifting. */
+ /* Note that bits may be lost if shift is set too high */
+ unsigned char jitter; /* if set compensate for fluctuations */
+ unsigned nsec_per_cyc; /* set by register_time_interpolator() */
+ void *addr; /* address of counter or function */
+ unsigned long offset; /* nsec offset at last update of interpolator */
+ unsigned long last_counter; /* counter value in units of the counter at last update */
+ unsigned long last_cycle; /* Last timer value if TIME_SOURCE_JITTER is set */
unsigned long frequency; /* frequency in counts/second */
long drift; /* drift in parts-per-million (or -1) */
+ unsigned long skips; /* skips forward */
+ unsigned long ns_skipped; /* nanoseconds skipped */
+ struct time_interpolator *next;
};
-extern volatile unsigned long last_nsec_offset;
-#ifndef __HAVE_ARCH_CMPXCHG
-extern spin_lock_t last_nsec_offset_lock;
-#endif
-extern struct time_interpolator *time_interpolator;
-
extern void register_time_interpolator(struct time_interpolator *);
extern void unregister_time_interpolator(struct time_interpolator *);
-
-/* Called with xtime WRITE-lock acquired. */
-static inline void
-time_interpolator_update(long delta_nsec)
-{
- struct time_interpolator *ti = time_interpolator;
-
- if (last_nsec_offset > 0) {
-#ifdef __HAVE_ARCH_CMPXCHG
- unsigned long new, old;
-
- do {
- old = last_nsec_offset;
- if (old > delta_nsec)
- new = old - delta_nsec;
- else
- new = 0;
- } while (cmpxchg(&last_nsec_offset, old, new) != old);
-#else
- /*
- * This really hurts, because it serializes gettimeofday(), but without an
- * atomic single-word compare-and-exchange, there isn't all that much else
- * we can do.
- */
- spin_lock(&last_nsec_offset_lock);
- {
- last_nsec_offset -= min(last_nsec_offset, delta_nsec);
- }
- spin_unlock(&last_nsec_offset_lock);
-#endif
- }
-
- if (ti)
- (*ti->update)(delta_nsec);
-}
-
-/* Called with xtime WRITE-lock acquired. */
-static inline void
-time_interpolator_reset(void)
-{
- struct time_interpolator *ti = time_interpolator;
-
- last_nsec_offset = 0;
- if (ti)
- (*ti->reset)();
-}
-
-/* Called with xtime READ-lock acquired. */
-static inline unsigned long
-time_interpolator_get_offset(void)
-{
- struct time_interpolator *ti = time_interpolator;
- if (ti)
- return (*ti->get_offset)();
- return last_nsec_offset;
-}
+extern void time_interpolator_reset(void);
+extern unsigned long time_interpolator_resolution(void);
+extern unsigned long time_interpolator_get_offset(void);
#else /* !CONFIG_TIME_INTERPOLATION */
static inline void
-time_interpolator_update(long delta_nsec)
-{
-}
-
-static inline void
time_interpolator_reset(void)
{
}
-static inline unsigned long
-time_interpolator_get_offset(void)
-{
- return 0;
-}
-
#endif /* !CONFIG_TIME_INTERPOLATION */
#endif /* KERNEL */
Index: linux/kernel/timer.c
===================================================================
--- linux.orig/kernel/timer.c 2004-09-27 09:42:50.000000000 -0700
+++ linux/kernel/timer.c 2004-09-27 09:42:51.000000000 -0700
@@ -37,6 +37,12 @@
#include <asm/div64.h>
#include <asm/timex.h>
+#ifdef CONFIG_TIME_INTERPOLATION
+static void time_interpolator_update(long delta_nsec);
+#else
+#define time_interpolator_update(x)
+#endif
+
/*
* per-CPU timer vector definitions:
*/
@@ -618,6 +624,9 @@
if (xtime.tv_sec % 86400 == 0) {
xtime.tv_sec--;
wall_to_monotonic.tv_sec++;
+ /* The timer interpolator will make time change gradually instead
+ * of an immediate jump by one second.
+ */
time_interpolator_update(-NSEC_PER_SEC);
time_state = TIME_OOP;
clock_was_set();
@@ -629,6 +638,7 @@
if ((xtime.tv_sec + 1) % 86400 == 0) {
xtime.tv_sec++;
wall_to_monotonic.tv_sec--;
+ /* Use of time interpolator for a gradual change of time */
time_interpolator_update(NSEC_PER_SEC);
time_state = TIME_WAIT;
clock_was_set();
@@ -1428,15 +1438,109 @@
}
#ifdef CONFIG_TIME_INTERPOLATION
-volatile unsigned long last_nsec_offset;
-#ifndef __HAVE_ARCH_CMPXCHG
-spinlock_t last_nsec_offset_lock = SPIN_LOCK_UNLOCKED;
-#endif
struct time_interpolator *time_interpolator;
static struct time_interpolator *time_interpolator_list;
static spinlock_t time_interpolator_lock = SPIN_LOCK_UNLOCKED;
+static inline unsigned long time_interpolator_get_cycles(unsigned int src)
+{
+ unsigned long (*x)(void);
+
+ switch (src)
+ {
+ case TIME_SOURCE_FUNCTION:
+ x = time_interpolator->addr;
+ return x();
+
+ case TIME_SOURCE_MMIO64 :
+ return readq(time_interpolator->addr);
+
+ case TIME_SOURCE_MMIO32 :
+ return readl(time_interpolator->addr);
+ default: return get_cycles();
+ }
+}
+
+static inline unsigned long time_interpolator_get_counter(void)
+{
+ unsigned int src = time_interpolator->source;
+
+ if (time_interpolator->jitter)
+ {
+ unsigned long lcycle;
+ unsigned long now;
+
+ do {
+ lcycle = time_interpolator->last_cycle;
+ now = time_interpolator_get_cycles(src);
+ if (lcycle && time_after(lcycle, now)) return lcycle;
+ /* Keep track of the last timer value returned. The use of cmpxchg here
+ * will cause contention in an SMP environment.
+ */
+ } while (unlikely(cmpxchg(&time_interpolator->last_cycle, lcycle, now) != lcycle));
+ return now;
+ }
+ else
+ return time_interpolator_get_cycles(src);
+}
+
+void time_interpolator_reset(void)
+{
+ time_interpolator->offset = 0;
+ time_interpolator->last_counter = time_interpolator_get_counter();
+}
+
+unsigned long time_interpolator_resolution(void)
+{
+ return NSEC_PER_SEC / time_interpolator->frequency;
+}
+
+#define GET_TI_NSECS(count,i) ((((count) - i->last_counter) * i->nsec_per_cyc) >> i->shift)
+
+unsigned long time_interpolator_get_offset(void)
+{
+ return time_interpolator->offset +
+ GET_TI_NSECS(time_interpolator_get_counter(), time_interpolator);
+}
+
+static void time_interpolator_update(long delta_nsec)
+{
+ unsigned long counter = time_interpolator_get_counter();
+ unsigned long offset = time_interpolator->offset + GET_TI_NSECS(counter, time_interpolator);
+
+ /* The interpolator compensates for late ticks by accumulating
+ * the late time in time_interpolator->offset. A tick earlier than
+ * expected will lead to a reset of the offset and a corresponding
+ * jump of the clock forward. Again this only works if the
+ * interpolator clock is running slightly slower than the regular clock
+ * and the tuning logic insures that.
+ */
+
+ if (delta_nsec < 0 || (unsigned long) delta_nsec < offset)
+ time_interpolator->offset = offset - delta_nsec;
+ else {
+ time_interpolator->skips++;
+ time_interpolator->ns_skipped += delta_nsec - offset;
+ time_interpolator->offset = 0;
+ }
+ time_interpolator->last_counter = counter;
+
+ /* Tuning logic for time interpolator invoked every minute or so.
+ * Decrease interpolator clock speed if no skips occurred and an offset is carried.
+ * Increase interpolator clock speed if we skip too much time.
+ */
+ if (jiffies % INTERPOLATOR_ADJUST == 0)
+ {
+ if (time_interpolator->skips == 0 && time_interpolator->offset > TICK_NSEC)
+ time_interpolator->nsec_per_cyc--;
+ if (time_interpolator->ns_skipped > INTERPOLATOR_MAX_SKIP && time_interpolator->offset == 0)
+ time_interpolator->nsec_per_cyc++;
+ time_interpolator->skips = 0;
+ time_interpolator->ns_skipped = 0;
+ }
+}
+
static inline int
is_better_time_interpolator(struct time_interpolator *new)
{
@@ -1449,10 +1553,13 @@
void
register_time_interpolator(struct time_interpolator *ti)
{
+ ti->nsec_per_cyc = (NSEC_PER_SEC << ti->shift) / ti->frequency;
spin_lock(&time_interpolator_lock);
write_seqlock_irq(&xtime_lock);
- if (is_better_time_interpolator(ti))
+ if (is_better_time_interpolator(ti)) {
time_interpolator = ti;
+ time_interpolator_reset();
+ }
write_sequnlock_irq(&xtime_lock);
ti->next = time_interpolator_list;
@@ -1483,6 +1590,7 @@
for (curr = time_interpolator_list; curr; curr = curr->next)
if (is_better_time_interpolator(curr))
time_interpolator = curr;
+ time_interpolator_reset();
}
write_sequnlock_irq(&xtime_lock);
spin_unlock(&time_interpolator_lock);
Index: linux/arch/ia64/kernel/asm-offsets.c
===================================================================
--- linux.orig/arch/ia64/kernel/asm-offsets.c 2004-04-03 19:38:16.000000000 -0800
+++ linux/arch/ia64/kernel/asm-offsets.c 2004-09-27 09:42:51.000000000 -0700
@@ -188,9 +188,6 @@
DEFINE(IA64_CLONE_VM, CLONE_VM);
BLANK();
- /* used by fsys_gettimeofday in arch/ia64/kernel/fsys.S */
- DEFINE(IA64_CPUINFO_ITM_DELTA_OFFSET, offsetof (struct cpuinfo_ia64, itm_delta));
- DEFINE(IA64_CPUINFO_ITM_NEXT_OFFSET, offsetof (struct cpuinfo_ia64, itm_next));
DEFINE(IA64_CPUINFO_NSEC_PER_CYC_OFFSET, offsetof (struct cpuinfo_ia64, nsec_per_cyc));
DEFINE(IA64_TIMESPEC_TV_NSEC_OFFSET, offsetof (struct timespec, tv_nsec));
@@ -207,5 +204,21 @@
BLANK();
DEFINE(IA64_MCA_TLB_INFO_SIZE, sizeof (struct ia64_mca_tlb_info));
+ /* used by head.S */
+ DEFINE(IA64_CPUINFO_NSEC_PER_CYC_OFFSET, offsetof (struct cpuinfo_ia64, nsec_per_cyc));
+ BLANK();
+ /* used by fsys_gettimeofday in arch/ia64/kernel/fsys.S */
+ DEFINE(IA64_TIME_INTERPOLATOR_ADDRESS_OFFSET, offsetof (struct time_interpolator, addr));
+ DEFINE(IA64_TIME_INTERPOLATOR_SOURCE_OFFSET, offsetof (struct time_interpolator, source));
+ DEFINE(IA64_TIME_INTERPOLATOR_SHIFT_OFFSET, offsetof (struct time_interpolator, shift));
+ DEFINE(IA64_TIME_INTERPOLATOR_NSEC_OFFSET, offsetof (struct time_interpolator, nsec_per_cyc));
+ DEFINE(IA64_TIME_INTERPOLATOR_OFFSET_OFFSET, offsetof (struct time_interpolator, offset));
+ DEFINE(IA64_TIME_INTERPOLATOR_LAST_CYCLE_OFFSET, offsetof (struct time_interpolator, last_cycle));
+ DEFINE(IA64_TIME_INTERPOLATOR_LAST_COUNTER_OFFSET, offsetof (struct time_interpolator, last_counter));
+ DEFINE(IA64_TIME_INTERPOLATOR_JITTER_OFFSET, offsetof (struct time_interpolator, jitter));
+ DEFINE(IA64_TIME_SOURCE_CPU, TIME_SOURCE_CPU);
+ DEFINE(IA64_TIME_SOURCE_MMIO64, TIME_SOURCE_MMIO64);
+ DEFINE(IA64_TIME_SOURCE_MMIO32, TIME_SOURCE_MMIO32);
+ DEFINE(IA64_TIMESPEC_TV_NSEC_OFFSET, offsetof (struct timespec, tv_nsec));
}
Index: linux/Documentation/time_interpolators.txt
===================================================================
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
+++ linux/Documentation/time_interpolators.txt 2004-09-27 09:42:51.000000000 -0700
@@ -0,0 +1,40 @@
+Time Interpolators
+------------------
+
+Time interpolators are a base of time calculation between timer ticks and
+allow an accurate determination of time down to the accuracy of the time
+source in nanoseconds.
+
+The architecture specific code typically provides gettimeofday and
+settimeofday under Linux. The time interpolator provides both if an arch
+defines CONFIG_TIME_INTERPOLATION. The arch still must set up timer tick
+operations and call the necessary functions to advance the clock.
+With the time interpolator a standardized interface exists for time
+interpolation between ticks which also allows the determination
+of time in a hardware independent way. The provided logic is highly scalable
+and has been tested in SMP situations of up to 512 CPUs.
+
+If CONFIG_TIME_INTERPOLATION is defined then the architecture specific code
+(or the device drivers - like HPET) must register time interpolators.
+These are typically defined in the following way:
+
+static struct time_interpolator my_interpolator;
+
+void time_init(void)
+{
+ ....
+ /* Initialization of the timer *.
+ my_interpolator.frequency = MY_FREQUENCY;
+ my_interpolator.source = TIME_SOURCE_MMIO32;
+ my_interpolator.address = &my_timer;
+ my_interpolator.shift = 32; /* increase accuracy of scaling */
+ my_interpolator.drift = -1; /* Unknown */
+ my_interpolator.jitter = 0; /* A stable time source */
+ register_time_interpolator(&my_interpolator);
+ ....
+}
+
+For more details see include/linux/timex.h.
+
+Christoph Lameter <christoph@lameter.com>, September 8, 2004
+
Index: linux/kernel/time.c
===================================================================
--- linux.orig/kernel/time.c 2004-09-27 09:42:50.000000000 -0700
+++ linux/kernel/time.c 2004-09-27 09:42:51.000000000 -0700
@@ -127,7 +127,7 @@
write_seqlock_irq(&xtime_lock);
wall_to_monotonic.tv_sec -= sys_tz.tz_minuteswest * 60;
xtime.tv_sec += sys_tz.tz_minuteswest * 60;
- time_interpolator_update(sys_tz.tz_minuteswest * 60 * NSEC_PER_SEC);
+ time_interpolator_reset();
write_sequnlock_irq(&xtime_lock);
clock_was_set();
}
@@ -447,6 +447,68 @@
tv->tv_sec = sec;
tv->tv_nsec = nsec;
}
+
+int do_settimeofday (struct timespec *tv)
+{
+ time_t wtm_sec, sec = tv->tv_sec;
+ long wtm_nsec, nsec = tv->tv_nsec;
+
+ if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ return -EINVAL;
+
+ write_seqlock_irq(&xtime_lock);
+ {
+ /*
+ * This is revolting. We need to set "xtime" correctly. However, the value
+ * in this location is the value at the most recent update of wall time.
+ * Discover what correction gettimeofday would have done, and then undo
+ * it!
+ */
+ nsec -= time_interpolator_get_offset();
+
+ wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+ wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+ set_normalized_timespec(&xtime, sec, nsec);
+ set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+ time_adjust = 0; /* stop active adjtime() */
+ time_status |= STA_UNSYNC;
+ time_maxerror = NTP_PHASE_LIMIT;
+ time_esterror = NTP_PHASE_LIMIT;
+ time_interpolator_reset();
+ }
+ write_sequnlock_irq(&xtime_lock);
+ clock_was_set();
+ return 0;
+}
+
+EXPORT_SYMBOL(do_settimeofday);
+
+void do_gettimeofday (struct timeval *tv)
+{
+ unsigned long seq, nsec, usec, sec, offset;
+ do {
+ seq = read_seqbegin(&xtime_lock);
+ offset = time_interpolator_get_offset();
+ sec = xtime.tv_sec;
+ nsec = xtime.tv_nsec;
+ } while (unlikely(read_seqretry(&xtime_lock, seq)));
+
+ usec = (nsec + offset) / 1000;
+
+ while (unlikely(usec >= USEC_PER_SEC)) {
+ usec -= USEC_PER_SEC;
+ ++sec;
+ }
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+
+EXPORT_SYMBOL(do_gettimeofday);
+
+
#else
/*
* Simulate gettimeofday using do_gettimeofday which only allows a timeval